Publications

Order by: publication date number of citations

Apparent fine tunings for field theories with broken space-time symmetries

Alberto Nicolis, Ira Z. Rothstein

SciPost Phys. 16, 045 (2024) · published 9 February 2024 | · pdf

We exhibit a class of effective field theories that have hierarchically small Wilson coefficients for operators that are not protected by symmetries but are not finely tuned. These theories possess bounded target spaces and vacua that break space-time symmetries. We give a physical interpretation of these theories as generalized solids with open boundary conditions. We show that these theories realize unusual RG flows where higher dimensional (seemingly irrelevant) operators become relevant even at weak coupling. Finally, we present an example of a field theory whose vacuum energy relaxes to a hierarchically small value compared to the UV cut-off.
Design of a Majorana trijunction

Juan Daniel Torres Luna, Sathish R. Kuppuswamy, Anton R. Akhmerov

SciPost Phys. 16, 044 (2024) · published 9 February 2024 | · pdf

Braiding of Majorana states demonstrates their non-Abelian exchange statistics. One implementation of braiding requires control of the pairwise couplings between all Majorana states in a trijunction device. To have adiabaticity, a trijunction device requires the desired pair coupling to be sufficiently large and the undesired couplings to vanish. In this work, we design and simulate a trijunction device in a two-dimensional electron gas with a focus on the normal region that connects three Majorana states. We use an optimisation approach to find the operational regime of the device in a multi-dimensional voltage space. Using the optimization results, we simulate a braiding experiment by adiabatically coupling different pairs of Majorana states without closing the topological gap. We then evaluate the feasibility of braiding in a trijunction device for different shapes and disorder strengths.

1 citation
Quantifying non-stabilizerness via information scrambling

Arash Ahmadi, Eliska Greplova

SciPost Phys. 16, 043 (2024) · published 8 February 2024 | · pdf

The advent of quantum technologies brought forward much attention to the theoretical characterization of the computational resources they provide. A method to quantify quantum resources is to use a class of functions called magic monotones and stabilizer entropies, which are, however, notoriously hard and impractical to evaluate for large system sizes. In recent studies, a fundamental connection between information scrambling, the magic monotone mana and 2-Renyi stabilizer entropy was established. This connection simplified magic monotone calculation, but this class of methods still suffers from exponential scaling with respect to the number of qubits. In this work, we establish a way to sample an out-of-time-order correlator that approximates magic monotones and 2-Renyi stabilizer entropy. We numerically show the relation of these sampled correlators to different non-stabilizerness measures for both qubit and qutrit systems and provide an analytical relation to 2-Renyi stabilizer entropy. Furthermore, we put forward and simulate a protocol to measure the monotonic behaviour of magic for the time evolution of local Hamiltonians.
divERGe implements various Exact Renormalization Group examples

Jonas B. Profe, Dante M. Kennes, Lennart Klebl

SciPost Phys. Codebases 26 (2024) · published 8 February 2024 | · pdf

We present divERGe, an open source, high-performance C/C++/Python library for functional renormalization group (FRG) calculations on lattice fermions. The versatile model interface is tailored to real materials applications and seamlessly integrates with existing, standard tools from the ab-initio community. The code fully supports multi-site, multi-orbital, and non-SU(2) models in all of the three included FRG variants: TU$^2$FRG, N-patch FRG, and grid FRG. With this, the divERGe library paves the way for widespread application of FRG as a tool in the study of competing orders in quantum materials.

2 citations
Codebase release 0.5 for divERGe

Jonas B. Profe, Dante M. Kennes, Lennart Klebl

SciPost Phys. Codebases 26-r0.5 (2024) · published 8 February 2024 | · src

We present divERGe, an open source, high-performance C/C++/Python library for functional renormalization group (FRG) calculations on lattice fermions. The versatile model interface is tailored to real materials applications and seamlessly integrates with existing, standard tools from the ab-initio community. The code fully supports multi-site, multi-orbital, and non-SU(2) models in all of the three included FRG variants: TU$^2$FRG, N-patch FRG, and grid FRG. With this, the divERGe library paves the way for widespread application of FRG as a tool in the study of competing orders in quantum materials.

1 citation
Soliton confinement in the double sine-Gordon model

Sergei Rutkevich

SciPost Phys. 16, 042 (2024) · published 7 February 2024 | · pdf

The double sine-Gordon field theory in the weak confinement regime is studied. It represents the small non-integrable deformation of the standard sine-Gordon model caused by the cosine perturbation with the frequency reduced by the factor of 2. This perturbation leads to the confinement of the sine-Gordon solitons, which become coupled into the 'meson' bound states. We classify the meson states in the weak confinement regime, and obtain three asymptotic expansions for their masses, which can be used in different regions of the model parameters. It is shown, that the sine-Gordon breathers, slightly deformed by the perturbation term, transform into the mesons upon increase of the sine-Gordon coupling constant.
Integrability and complexity in quantum spin chains

Ben Craps, Marine De Clerck, Oleg Evnin, Philip Hacker

SciPost Phys. 16, 041 (2024) · published 7 February 2024 | · pdf

There is a widespread perception that dynamical evolution of integrable systems should be simpler in a quantifiable sense than the evolution of generic systems, though demonstrating this relation between integrability and reduced complexity in practice has remained elusive. We provide a connection of this sort by constructing a specific matrix in terms of the eigenvectors of a given quantum Hamiltonian. The null eigenvalues of this matrix are in one-to-one correspondence with conserved quantities that have simple locality properties (a hallmark of integrability). The typical magnitude of the eigenvalues, on the other hand, controls an explicit bound on Nielsen's complexity of the quantum evolution operator, defined in terms of the same locality specifications. We demonstrate how this connection works in a few concrete examples of quantum spin chains that possess diverse arrays of highly structured conservation laws mandated by integrability.

8 citations
Comparative analysis of tight-binding models for transition metal dichalcogenides

Bert Jorissen, Lucian Covaci, Bart Partoens

SciPost Phys. Core 7, 004 (2024) · published 6 February 2024 | · pdf

We provide a comprehensive analysis of the prominent tight-binding (TB) models for transition metal dichalcogenides (TMDs) available in the literature. We inspect the construction of these TB models, discuss their parameterization used and conduct a thorough comparison of their effectiveness in capturing important electronic properties. Based on these insights, we propose a novel TB model for TMDs designed for enhanced computational efficiency. Utilizing $MoS_2$ as a representative case, we explain why specific models offer a more accurate description. Our primary aim is to assist researchers in choosing the most appropriate TB model for their calculations on TMDs.

1 citation
DFT2kp: Effective kp models from ab-initio data

João Victor V. Cassiano, Augusto de Lelis Araújo, Paulo E. Faria Junior, Gerson J. Ferreira

SciPost Phys. Codebases 25 (2024) · published 5 February 2024 | · pdf

The $k\cdot p$ method, combined with group theory, is an efficient approach to obtain the low energy effective Hamiltonians of crystalline materials. Although the Hamiltonian coefficients are written as matrix elements of the generalized momentum operator $\pi= p+ p_{SOC}$ (including spin-orbit coupling corrections), their numerical values must be determined from outside sources, such as experiments or ab initio methods. Here, we develop a code to explicitly calculate the Kane (linear in crystal momentum) and Luttinger (quadratic in crystal momentum) parameters of $k\cdot p$ effective Hamiltonians directly from ab initio wavefunctions provided by Quantum ESPRESSO. Additionally, the code analyzes the symmetry transformations of the wavefunctions to optimize the final Hamiltonian. This is an optional step in the code, where it numerically finds the unitary transformation $U$ that rotates the basis towards an optimal symmetry-adapted representation informed by the user. Throughout the paper, we present the methodology in detail and illustrate the capabilities of the code applying it to a selection of relevant materials. Particularly, we show a "hands-on" example of how to run the code for graphene (with and without spin-orbit coupling). The code is open source and available at https://gitlab.com/dft2kp/dft2kp.

2 citations
Codebase release 0.0 for DFT2kp

João Victor V. Cassiano, Augusto de Lelis Araújo, Paulo E. Faria Junior, Gerson J. Ferreira

SciPost Phys. Codebases 25-r0.0 (2024) · published 5 February 2024 | · src

The $k\cdot p$ method, combined with group theory, is an efficient approach to obtain the low energy effective Hamiltonians of crystalline materials. Although the Hamiltonian coefficients are written as matrix elements of the generalized momentum operator $\pi= p+ p_{SOC}$ (including spin-orbit coupling corrections), their numerical values must be determined from outside sources, such as experiments or ab initio methods. Here, we develop a code to explicitly calculate the Kane (linear in crystal momentum) and Luttinger (quadratic in crystal momentum) parameters of $k\cdot p$ effective Hamiltonians directly from ab initio wavefunctions provided by Quantum ESPRESSO. Additionally, the code analyzes the symmetry transformations of the wavefunctions to optimize the final Hamiltonian. This is an optional step in the code, where it numerically finds the unitary transformation $U$ that rotates the basis towards an optimal symmetry-adapted representation informed by the user. Throughout the paper, we present the methodology in detail and illustrate the capabilities of the code applying it to a selection of relevant materials. Particularly, we show a "hands-on" example of how to run the code for graphene (with and without spin-orbit coupling). The code is open source and available at https://gitlab.com/dft2kp/dft2kp.

1 citation

Previous 1 ... 33 34 35 36 37 38 39 40 41 42 43 ... 297 Next

Publications

1 citation

2 citations

1 citation

8 citations

1 citation

2 citations

1 citation