Publications

Order by: publication date number of citations

• Physics motivation and detector upgrades for the new era of the ATLAS experiment

  Jason Nielsen

  SciPost Phys. Proc. 8, 126 (2022) · published 13 July 2022 | Toggle abstract · pdf

  The ATLAS experiment at CERN’s Large Hadron Collider (LHC) will be upgraded in two stages to prepare first for the Run 3 data-taking campaign, during which the integrated luminosity will roughly double, and then for the High-Luminosity LHC program with an ultimate integrated luminosity of up to 4 ab-1. These upgrades and high-statistics datasets will allow ATLAS to perform searches and precision measurements to constrain the Standard Model in yet-unexplored phase spaces and in the Higgs sector. This contribution summarizes the ATLAS detector upgrades and selected physics prospects for Run 3 and the HL-LHC.

• Comparison of $pp$ and $p \bar{p}$ differential elastic cross sections and observation of the exchange of a colorless $C$-odd gluonic compound

  C. Royon

  SciPost Phys. Proc. 8, 138 (2022) · published 14 July 2022 | Toggle abstract · pdf

  We describe the discovery of the colorless $C$-odd gluonic compound, the odderon, by the D0 and TOTEM Collaborations by comparing elastic differential cross sections in $pp$ and $p \bar{p}$ interactions at high energies.

• Measurements of $W$ and $Z/γ^*$ cross sections and their ratios in $pp$ collisions at STAR

  Jae Nam

  SciPost Phys. Proc. 8, 140 (2022) · published 14 July 2022 | Toggle abstract · pdf

  While the unpolarized parton distribution functions of the valence quarks ($d$ and $u$) are well determined from DIS experiments, the sea quark counterparts, $\bar{d}$ and $\bar{u}$, are much less constrained, in particular, near the valence region. Measurements of $W^+/W^-$ production ratio in $pp$ collider experiments, such as the STAR experiment at RHIC, can probe the $\bar{d}/\bar{u}$ ratio at a large $Q^2$ set by the $W$ mass. These proceedings will discuss recent results of $W$ and $Z$ cross-section measurements using the STAR $pp$ collision data at a center-of-mass energy of $\sqrt{s} = 500/510\;\mathrm{GeV}$ collected in 2011, 2012, 2013 and 2017.

• TMD observables in unpolarised Semi-Inclusive DIS at COMPASS

  Andrea Moretti

  SciPost Phys. Proc. 8, 144 (2022) · published 14 July 2022 | Toggle abstract · pdf

  In 2016 and 2017, the COMPASS Collaboration at CERN collected a large sample of DIS events with a longitudinally polarised 160 GeV/$c$ muon beam scattering off a liquid hydrogen target. Part of the collected data has been analysed to extract preliminary results for the amplitudes of the modulations in the azimuthal angle of the charged hadrons and for their transverse-momentum distributions. These observables give relevant information for the study of the transverse momentum and spin structure of the nucleon. Similarly to the results obtained in COMPASS with a deuteron target, the azimuthal asymmetries exhibit interesting kinematic dependences, while the squared-transverse-momentum distributions can be described by two exponentials.

• Transverse spin asymmetries for inclusive $\rho^0$ production in SIDIS at COMPASS

  A. Kerbizi

  SciPost Phys. Proc. 8, 146 (2022) · published 14 July 2022 | Toggle abstract · pdf

  The production of vector mesons in SIDIS is a particularly interesting channel to study the polarized fragmentation and related phenomena. Preliminary COMPASS results for the first measurement of inclusive $\rho^0$ Collins and Sivers transverse-spin asymmetries are presented here for the first time. The analysis is based on the data-set collected by COMPASS in $2010$ using a $160\, \rm{GeV}/c$ $\mu^+$ beam and a transversely polarized $NH_3$ target. The asymmetries are extracted as function of Bjorken-$x$, of the total transverse momentum of the oppositely charged hadron pair and of the fraction of available energy $z$ carried by the pair. Indications for positive Collins and Sivers asymmetries are obtained as expected from models.

• DIS physics at the EIC and LHeC and connections to the future LHC and $\nu$A programs

  T. J. Hobbs

  SciPost Phys. Proc. 8, 155 (2022) · published 14 July 2022 | Toggle abstract · pdf

  Deeply-inelastic scattering (DIS) stands to enter a golden age with the prospect of precision programs at the Electron-Ion Collider (EIC) and Large Hadron-electron Collider (LHeC). While these programs will be of considerable importance to resolving longstanding issues in (non)perturbative QCD as well as hadronic and nuclear structure, they will also have valuable implications for a wider range of physics at the Energy and Intensity Frontiers, including at the High-Luminosity LHC (HL-LHC) and future $\nu A$ facilities. In this plenary contribution, we highlight a number of salient examples of the potential HEP impact from the complementary EIC and LHeC programs drawn from their respective Yellow Report and Whitepaper. Interested readers are encouraged to consult the extensive studies and literature from which these examples are taken for more detail.

• ATLAS LAr Calorimeter commissioning for LHC Run-3

  Luka Selem

  SciPost Phys. Proc. 8, 157 (2022) · published 14 July 2022 | Toggle abstract · pdf

  The ATLAS experiment at the Large Hadron Collider (LHC) measures proton--proton collisions at high energies. Within the Phase-I upgrade of the LHC before the start of Run-3 in 2022, the trigger system of the Liquid Argon calorimeter of ATLAS is being prepared to cope with an increased number of simultaneous proton--proton collisions. In the back-end of this new trigger system, the LATOME boards will be responsible for the computation of the energies deposited in the calorimeter. The commissioning of this computation within the LATOME is presented.

• Development of the ATLAS Liquid Argon Calorimeter Readout Electronics for the HL-LHC

  Mathis Kolb

  SciPost Phys. Proc. 8, 158 (2022) · published 14 July 2022 | Toggle abstract · pdf

  The full ATLAS Liquid Argon Calorimeter electronic readout chain will be upgraded for the high-luminosity LHC. The upgrade is designed to withstand the expected radiation level and to be compatible with the Phase-I Digital Trigger System which is being installed right now. Analogue electronics shape and amplify the calorimeter signals before they are digitized with 16 bit dynamic range on two gain scales. The on-detector system samples the calorimeter cell signals at 40 MHz and sends them to the off-detector electronics which apply digital processing based on FPGAs. Design studies and tests of prototypes of the upgraded components are present

• Hadron Polarimetry for the Electron-Ion Collider

  A.S. Nunes, E.C. Aschenauer, O. Eyser, W. Schmidke

  SciPost Phys. Proc. 8, 163 (2022) · published 14 July 2022 | Toggle abstract · pdf

  The Electron-Ion Collider (EIC) will be the first collider to use both polarized electron beams and polarized proton and light ion beams. It will therefore offer unique opportunities to study the structure of nucleons and to answer fundamental questions in QCD. The uncertainties on the polarization measurement translate directly into the uncertainties of final physics observables. Hence, a precise measurement of the hadron beam polarization and a good control of systematic uncertainties are critical for the success of the spin program at the EIC. Contrary to the case of electron beam polarimetry, which uses physical processes derived from first principles that allow a high precision extraction of the electron beam polarization, for hadron beams no such process is available. The currently best used methods rely on the process of elastic scattering in the Coulomb-Nuclear Interference (CNI) region, for which there are only effective models available. The experience from RHIC, the only existing polarized proton collider, will be detailed and the challenges of the measurements at the EIC will be addressed. In particular, measurements of the present RHIC polarimeters and simulations of the future EIC polarimeters will be presented.

• The ATLAS Tile Calorimeter performance and its upgrade towards the High Luminosity Large Hadron Collider

  Ryan Mckenzie

  SciPost Phys. Proc. 8, 171 (2022) · published 14 July 2022 | Toggle abstract · pdf

  The Tile Calorimeter (TileCal) is a sampling calorimeter that forms the central region of the hadronic calorimeter of the ATLAS experiment. This sub-detector is to undergo its Phase-II upgrade during long-shutdown 3, in the years from 2025 to mid 2027, in preparation for the start of operation of the High Luminosity Large Hadron Collider (HL-LHC) in 2027. In this proceeding, an overview of the TileCal HL-LHC on-detector electronics upgrade is provided. The detectors Run-II performance in the cases of EM scale calibration, calorimeter response, cell energy distribution and noise as well as a portion of the 2015-2018 Test-beam campaigns results are examined.